Saramonic SmartRig+ Di 8 Pin Interface Dual Channel Microphone Guitar Mobile Phone Audio Mixer Adapter

Description

1. It allows you to connect a professional microphone/guitar to record high-quality sound or create music using 8 Pin interface devices
2. It provides 48V phantom power for the microphone and 3.5mm headphone output for real-time monitoring
3. Very suitable for capturing sound on site, 2 independent audio input channels, each channel is equipped with dual XLR inputs (guitar/line)
4. The 8 Pin interface allows you to record excellent stereo to your iOS device
5. Two knobs can easily set the precise level. Switch between mono and stereo output modes as needed. Enjoy the function of true stereo recording and the versatility of recording two independent audio tracks
6. Route your audio signal to your favorite DSLR camera or any smart phone through a standard headphone jack or through TRRS, and monitor it in real time while you are shooting on site
7. Frequency response: 20 Hz-20 Khz, +/-0.5 dB
8. THD: less than 0.01%@1KHZ, -30dBu input
9. Signal to noise ratio: 78 DB @1KHZ, -30dBu input
10. Sampling rate: 44.1Khz or 48khz
11. Power requirements: a 9V alkaline or lithium battery
12. Dimensions: 120 x 40 x 40 mm
13. Weight: 130g (without battery)