Specifications
1. Model: AD600 Pro
2. Wireless Slave Mode: Radio Transmission Mode (For Nikon & Canon, Sony, Olympus, Panasonic, Fujifilm)
3. Flash Mode: Wireless Off: Slave Unit for Radio Transmission/M/Multi:TTL/M/Multi
4. Guide No. (m ISO 100): 87 (m ISO 100 with high efficiency standard reflector)
5. Flash duration: 1/220 to 1/10100 sec
6. Power: 600W
7. Power output: 9 gears: 1/256~1/1
8. Strobe: Provided (up to 100 times, 100Hz)
9. Flash Exposure Compensation (FEC): Manual. FEB: +/-3 stops in 1/3 stop increments.
10. Sync mode: High-speed sync (up to 1/8000 sec), front-curtain sync, rear-curtain sync
11. Delay flash: 0.01~30 seconds
12. Modeling light LED: 38W/4800K/TLIC:93
13. Optical slave flash: S1/S2
14. Display: dot matrix panel
15. Wireless flash function: slave, off
16. Controllable slave groups: 5 (A, B, C, D, E)
17. Transmission range (approximately): 100m
18. Channel: 32 (1~32)
19. Wireless ID: In order to effectively avoid signal interference, it can only be triggered when the channel and wireless ID settings of the master and slave are the same.
20. Full power blink: 360
21. Recovery time: about 0.01-0.9s
22. Power indication: Automatically shut down after about 10 minutes. 30-120 minutes of idle operation.
23. Synchronization trigger mode: 3.5mm synchronization line, wireless control port
24. Color temperature: 5600+/-200k
25. Stable color temperature mode: +/-75K change over the entire power range
Package List
1. AD600 Pro Flash x 1
2. Flash tube x 1
3. Battery x 1
4. Battery Charger x 1
5. Power Cable x 1
6. Reflector x 1
7. Manual x 1