About The Protuct
This AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B+. It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.
Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, you are almost there, our open source demo codes is ready to help you get started fast.
1. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC 1.4GHz
2. 1GB LPDDR2 SDRAM
3. 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
4. Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
5. Extended 40-pin GPIO header
6. Full-size HDMI
7. 4 USB 2.0 ports
8. CSI camera port for connecting a Raspberry Pi camera
9. DSI display port for connecting a Raspberry Pi touchscreen display
10. 4-pole stereo output and composite video port
11. Micro SD port for loading your operating system and storing data
12. 5V/2.5A DC power input
13. Power-over-Ethernet (PoE) support (requires separate PoE HAT)
Features
AlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.
AlphaBot2-Base, the lower base chassis:
1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking
2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring
3. TB6612FNG dual H-bridge motor driver, compared with L298P, it is more efficient, more compact, and less heating
4. N20 micro gear motor, with metal gears, low noise, high accuracy
5. Onboard RGB LEDs, true color lighting, pretty cool
AlphaBot2-Pi, the upper adapter board for controller:
1. LM2596 voltage regulator, provides the Pi with stable 5V power
2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors
3. PCA9685 servo controller, make it more smoothly to rotate the pan head
4. CP2102 UART converter, easy for controlling the Pi via UART
Package List
1. AlphaBot2-Pi (adapter board) x 1
2. AlphaBot2-Base (base chassis) x 1
3. RPi Camera (B) x 1
4. Micro SD Card 16GB x1
5. Power adapter US standard 5V/3A micro x 1
6. SG90 servo x 2
7. 2 DOF pan and tilt kit x 1
8. IR remote controller x 1
9. FC-20P cable 8cm x 1
10. USB type A plug to micro B plug cable x 1
11. 15PIN FFC 25cm x 1
12. AlphaBot2-Pi screws x 1
13. Micro SD Card Reader x 1 (Extra Free)
14. Screwdriver x 1 (Extra Free)