COMFAST CF-E350N 300Mbps Wireless Ceiling AP WiFi Cover Access Point Antenna

Description

Features
1. Adopt Qualcomm 650GHz processor with stable performance.
2. Dual PA, improve wireless power, built-in dual antennas, and equipped with dual power amplifiers, large coverage.
3. It can realize 60+ terminal devices to access the Internet at the same time, and the network is fast and smooth. Ensure that the device can work stably in end-user-intensive environments.
4. Standard 48V POE power supply, simple and convenient, avoid a lot of potential safety hazards.
5. Built-in high-gain antenna to improve the signal quality and transmission performance of the AP coverage area.
6. Adopt the hidden structure of the network cable port, cleverly hide the network cable, and adapt to various environments.
7. Supports seamless roaming, APs are managed by the AC uniformly, and the terminal APs are set to a uniform SSID. No matter which AP the user goes to, the user can achieve zero-sensing switchover in seconds.
8. Support power adjustment. When the AP is strongly interfered, the AP transmit power can be flexibly adjusted to improve the wireless stability.

Specification
1. Hardware Specifications:
Qualcomm QCA9531 650MHz frequency
Memory: 128MB
Flash: 16MB
Amplifier chip: SE2576L x 2
2. Antenna specification: 3dBi x 2 built-in antenna
3. Wireless standard: IEEE802.11b/g/n
4. RF parameters:
Transmit power: 500mW (27dBm)
Receive sensitivity: -96dBm
Operating frequency: 802.11b/g/n: 2.4GHz-2.4835GHz
5. Modulation technology:
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps
OFDM: DBPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
MIMO-OFDM: MCS 0-15
6. Data rate:
11b: 1, 2, 5.5, 11Mbps
11g: 6,9,12,18,24,36,48,54Mbps
11n: MCS0-MCS15 (20MHz and 40MHz analog bandwidth)
20MHz: 144.4Mbps
40MHz: 300Mbps
7. Physical interface:
1 10/100Mbps WAN RJ45 Ethernet port, support POE power supply
1 10/100Mbps LAN RJ45 Ethernet port, support POE power supply
1 RESET reset button
8. Indicator light: 1 tri-color indicator light
9. Power supply:
Power supply mode: POE power supply, support 802.3af/802.3at standard (less than or equal to 100 meters)
Power adapter: 48V 0.32A POE power adapter
10. Power consumption: less than 8W
11. Shell material: ABS
12. Dimensions: 200 x 200 x 18mm
13. Weight: 0.34kg