LDTR - B0007 DC Motor Drive Module 4.5 - 6V 2 Chips H-Bridge DIY for Smart Car / Robot - Blue

Description

1. L9110 is widely applied in toy car motors, pulse electromagnetic valve drive, stepper motor drive and switching power tube circuit
2. L9110 is a two-channel push-pull type power amplifier ASIC device, designed to control and drive motor
3. Convert the discrete circuit into a single IC, reduce costs of peripheric devices and more reliable
4. With dual chips TTL / CMOS compatible with input electrical level
5. Good anti-interference performance
6. 2 output terminals can directly drive forward and reverse motion of the motor. It has a large current drive capability of 800mA continuous current per channel, the peak current capability up to 1.5A
7. With low output saturation voltage
8. Built-in clamping diode can release the reverse impulsive current of inductance load
9. Using instruction: VCC is connected to the power source, GND connected to ground, control terminal connected directly to the controller I/O ports, 1IB and 1IA control a DC motor, 2IB and 2IA control a DC motor
10. The voltage input range: DC 4.5 - 6V
11. With LED power indication light, convenient to observe the status of power supply
12. Pull-up resistance designed, avoid controller I/O port lack of output current
13. External motor connection terminals applied with 2-wire rotary heat-resistant terminals, more durable for wiring
14. With M3 mounting screw holes, convenient to install

Specification

Size

3.3*3.3*1cm

Weight

10g