Sound Card Mixer
1. Support 3 kinds of reverb
2. 4 scenarios: KTV concert hall, recording studio, shouting microphone
3. 4 kinds of voice changing modes: Original voice, female voice, male voice, child voice mode, you can fine-tune through the knob
4. 16 warm-up special effects: Applause, laughter, light-ning, proud, debut, 666, face slaps, kiss, donot laugh, strong, pretty boy, too hard, brother, follow
5. Support microphone high, medium and bass adjustment
6. Support one-key noise reduction, one-key cancellation of original sound, one-key dodge
7. DSP noise reduction chip, low power consumption
8. 12-port input and output
9. Bluetooth accompaniment input
10. 32-bit digital IR reverb effect
Specifications
1. Material: ABS + Metal
2. Bluetooth version: 5.0
3. Power supply: support phantom power 48V
4. Port I/O: 12 Port
5. Battery capacity: 1200mAh
6. Battery life: 5 hours
Wireless Microphone
1. Wireless microphone makes you move freely and do energetic and active performances
2. The rechargeable and portable receiver only needs to charge for long time
3. Plug and Play, cable-free, frequency automatic pairing, AA battery-powered handheld microphone, and lithium rechargeable battery powered receiver makes it portable
4. The microphone can be connected to multiple audio systems including speakers, amplifiers, wireless mic systems. Wireless microphones will give you the mobility and freedom of movement for stage performances, speeches, churches, weddings, etc.
5. Material: ABS
6. Signal-to-noise ratio: Greater than or equal to 70db
7. Frequency response range: 100Hz-20KHz
Wired Microphone
1. Professional recording studio equipment: Equipped with this microphone, shock mount, pop filter, mic adjustable suspension scissor arm stand, anti-wind foam cap, power cable, sound card
2. High performance: Cardioid directional pickup, full bass, clear treble, high-fidelity output, corrosion-resistant built-in three-pin XLR interface, sound quality transmission barrier-free
3. Process design: Streamlined design, baking paint process, all-metal body anti-interference, large back-pole microphone
4. DSP noise reduction: There are dual DSP noise reduction chips inside the sound card voice changer to avoid the influence of current noise, ensure high quality sound, and sing beautiful songs, reverb (ECHO) makes your voice more charming
5. Low Noise: It features high signal-to-noise ratio (SNR) that means less distortion to be caused on the process of recording, Unique 3-layer protection system prevents unwanted pop noises, providing singers with a clear, plosive-free vocal performance
6. Usage scenarios: Support Android, iOS mobile phones, tablets, notebooks and many other devices, intelligently compatible with various K-song live APPs
Specification:
1. Directionality: Single direction
2. Microphone material: Steel mesh + zinc alloy tube body
3. Frequency response: 20Hz-20kHz
4. Sensitivity: 45dB +/-1db
5. Output impedance: 150 ohm +/-30% (1 kHz)
6. Load impedance: greater than or equal to 1000 ohms
7. Equivalent noise level: 16 dba
8. Signal-to-noise ratio: 78 decibels
9. Microphone output interface: 3.5mm
10. Cable length: 2.5 m
11. Microphone size: 165mm long, 42mm handle diameter, 47mm head diameter
Ring LED Light
1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle.
2. The ring light is made of 2x60pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography.
3. 3 colors lighting mode adjustable brightness for your choose,you can adjust the color and brightness very easily.
4. Three colors of soft natural light illuminate your beauty in different occasions.
5. The USB ports can be used with multiple devices, such as connect computer host, laptop, mobile power and USB charger. You will be able to enjoy LED ring light at any time free.
6. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc.
7. The phone clamp suitable for the cellphone width of 6-8.5cm.
8. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.
9. When LED ring light is on, press and hold the ON/OFF button until to the indicator flashes. At this time, enter the delay off mode, delay one minute.
Ring LED Specifications
1. Number of beads: 2x60pcs
2. Lamp bead model: 2835
3. Lamp brightness: 24-26lm
4. White light color temperature: 6500K
5. Warm white color temperature: 3200K
6. Power: 0.39-9.4W
7. Voltage: 5V
8. Indicates: Ra>90
9. Dimming range: 1%-100%
10. Shell material: ABS, Acrylic light cover
11. Dimensions: outer diameter 260mm. inner diameter 210mm
12. Power supply: USB port power supply
13. Cable length: 2m
Tripod Mount
1. Made of high quality aluminum leg tube, durable and rugged.
2. Compact the tripod legs can be folded, making it small enough to carry just about anywhere.
3. Adjust the height of the tripod by adjusting the center axis to meet different shooting concepts.
4. Suitable for mobile phones, tablets, sports cameras, DV cameras, card machines or micro-singles.
5. Lightweight and portable design: Convenient to use for traveling or working outdoor etc.
Phantom Power
1. Phantom power will not add extra noise when in use.
2. Phantom power supply is compatible with any 48V condenser microphone music recording equipment.
3. Using safe and reliable materials for production, durable, lightweight, and portable.
4. Fantasy power supply has a built-in power transformer to provide a safe 48V power supply for the condenser microphone.
5. Material: Aluminum alloy
6. Input support: DC5V / AC18V
7. Output: 48V
8. Power consumption: 3W
Package List
1. Sound Card x 1
2. Wired Microphone x 1
3. Wireless Micphone with Receiver x 1
4. Tripod Holder x 1
5. Ring Light with USB Wire Control x 1
6. Micphone Bracket Rod x 1
7. Metal Shock Mount x 1
8. Suspension Scissor Arm x 1
9. Sound Card Tray x 1
10. Phantom Power x 1
11. Foam Cap x 1
12. Multi-Phone Bracket x 1
13. Pop Filter x 1
14. USB Charging Cable x 1
15. Audio Cable x 2
16. Earphones x 1
17. XLR Cable x 1